Submit a Paper

Propose a Workshop

Propose a Mini Symposium

The Seventh International Conference on Advanced Geographic Information Systems, Applications, and Services

GEOProcessing 2015
February 22 - 27, 2015 - Lisbon, Portugal


Call for Papers

Geographical sensors and satellites provide a huge volume of spatial data which is available on the Web. Making use of Web Services, the users are able for provisioning and using these services instead of only for document searching. These services are published in a directory and may be automatically discovered in a given context by software agents. Accessing large digital geographical libraries with geo-spatial information raises some challenges with respect to data semantics, interfaces, data accuracy and updates, distributed processing, as well as with discovery, indexing and integration of geographical information systems; this raise the issue of distributed catalogs forming a federation of spatial databases. Some spatial data infrastructures use service-oriented architecture for accessing these large databases via Web Services.

The goal of the International Conference on Advanced Geographic Information Systems, Applications, and Services, GEOProcessing 2015, is to bring together researchers from the academia and practitioners from the industry in order to address fundamentals of advances in geographic information systems and the new applications related to them using the Web Services. Such systems can be used for assessment, modeling and prognosis of emergencies. As an example, it can be used for assessment of accidents from chemical pollution by considering hazardous chemical zones dimensions represented on a computer map of the region's territory.

The conference will provide a forum where researchers shall be able to present recent research results and new research problems and directions related to them. The conference seeks contributions presenting novel research in all aspects of techniques and technologies applied to geographic information systems and Web Services.

We solicit both academic, research, and industrial contributions. We welcome technical papers presenting research and practical results, position papers addressing the pros and cons of specific proposals, such as those being discussed in the standard fora or in industry consortia, survey papers addressing the key problems and solutions on any of the above topics short papers on work in progress, and panel proposals.

Industrial presentations are not subject to the format and content constraints of regular submissions. We expect short and long presentations that express industrial position and status.

Tutorials on specific related topics and panels on challenging areas are encouraged.

The topics suggested by the conference can be discussed in term of concepts, state of the art, research, standards, implementations, running experiments, applications, and industrial case studies. Authors are invited to submit complete unpublished papers, which are not under review in any other conference or journal in the following, but not limited to, topic areas.

All topics and submission formats are open to both research and industry contributions.

Geo-spatial fundamentals
Fundamentals of geo-information
New trends in GIS technologies and research
Techniques for geographical representation
Integrated architectures for geo-spatial information
Geo-spatial data in net-centric environment
Geo-spatial technology
Discovery, indexing and integration of geographical information systems
Geo-processing of distributed data
Geo-information processing
Use of computational geometry for GIS problems
Virtual globes and their application to scientific research
Spatial decision support systems

Geo-spatial Web Services
Geo-spatial Web Services and applications
Geo-spatial Web Services and simulation and modeling
Geo-spatial Web Services and sensors
Geo-spatial Web Services and interoperability
Geo-spatial Web Services and processing
Geo-spatial Web Servcies and spatial analysis
Geo-spatial Web Services and society
Geo-spatial Web Services and information retrieval
Geo-spatial Web Services and human computer interaction
Geo-spatial Web Services and mobility

GIS
Wireless and mobile GIS
Integration of remote sensing, GIS and GPS
Statistics and application models of spatial data
GIS for the environment and health
Satellite positioning technology and LBS
Urban GIS and its applications
Theories and algorithms in GIS
Government and public GIS

Geo-spatial simulation and visualization
2D and 3D information visualization
Distributed simulations and sensor webs
Simulation modeling dynamic geo processes
Exploratory spatial data analysis
Fine-grained, terrestrial monitoring platforms
Geo-visualization and geo-visual analytics
Visualization of geospatial uncertainty
Representation and visualization of geospatial data

Geo-modeling
Standards and geo-spatial metadata
Novel geo-spatial data processing and management mechanisms
Spatio-temporal data modeling and reasoning
3D modeling and GIS
Modeling and analysis of terrains
Modeling uncertainty in geo-spatial information
Spatial and spatio-temporal statistics
Geo-spatial and spatio-temporal data mining
Virtual modeling of large geographic areas
Time-geography modeling

Digital cartography data
Digital geographical libraries
Exploratory cartography and interfaces
Digital cartography
Automated mapping and map generalization
Cartographic theory and applications
Data models in cartography
Geographical search engines

Earth Geo-observation
Climate change and the global environment
Data systems for the future Earth observation satellites
Calibration and validation of remotely sensed data
Earth observation sensor networks and applications
Earth observation technology and systems

Geo-sensing
Acquisition and processing of remotely sensed data
Information extraction from remotely sensed data
Data mining across sensor
Intelligent sensors/sensor fusion
Co-operative sensing and organization
Sensor information management systems
Spatio-temporal sensor data mining
Sensor networks and interaction with actuators
Geo-sensor specialized networks (e.g. disaster management, early warning systems, environmental monitoring)

Specific geo-data processing
Seismic data processing (stacking, migration, post-processing, interpretation)
Tomography (algorithms, methods)
Electromagnetic sounding
Near surface methods (archaeology, urban and environmental planning)
Combined geophysical methods (gravimetry, magnetics, borehole methods)
Seismology and planetology
Geo-natural data on phenomena (hurricane, winds, flooding, etc.)
Underground geo-reserves, natural resources, exploration (gas, oil, metals, etc.)
Natural geo-evolution and morphology (glaciers, oceanic streams, etc.)
Geo-marine life
Geology and earth system simulation and modelling

Geo-spatial domain applications
Geospatial Technologies for Disaster Management
Geology and hydrogeology geographical data
Standardization of geodata and geoservices
Environment and land surveying
Oceanographic geo-information
Natural resource information systems
Remote sensing geospatial data collection
Geo-spatial data and vehicular technologies
Geology and Hydrology applications
Location-based services
Environmental monitoring
Special applications: 3D cadastre, traffic management, etc.

Managing geo-spatial data
Managing uncertainty in spatial information
Automatic mapping (possibly web-based ...)
Digital elevation/shape modeling
Web-based visualization of statistical data within a geographic framework
Tools and links between GIS and statistical software packages
Business mapping (spatial analysis for business processes as customer segmentation, churn analysis, etc.)
Wireless sensor networks for spatial applications
Errors and their measurement in spatial data

 

INSTRUCTION FOR THE AUTHORS

Authors of selected papers will be invited to submit extended versions to one of the IARIA Journals.

Publisher: XPS (Xpert Publishing Services)
Archived: ThinkMindTM Digital Library (free access)
Prints available at Curran Associates, Inc.
Articles will be submitted to appropriate indexes.

Important deadlines:

Submission (full paper)

Sept 28 October 26, 2014

Notification

December 1, 2014

Registration

December 16, 2014

Camera ready

January 10, 2015

Only .pdf or .doc files will be accepted for paper submission. All received submissions will be acknowledged via an automated system.

Contribution types

  • regular papers [in the proceedings, digital library]
  • short papers (work in progress) [in the proceedings, digital library]
  • ideas: two pages [in the proceedings, digital library]
  • extended abstracts: two pages [in the proceedings, digital library]
  • posters: two pages [in the proceedings, digital library]
  • posters: slide only [slide-deck posted on www.iaria.org]
  • presentations: slide only [slide-deck posted on www.iaria.org]
  • demos: two pages [posted on www.iaria.org]
  • doctoral forum submissions: [in the proceedings, digital library]

Proposals for:

FORMATS

Only .pdf or .doc files will be accepted for paper submission. All received submissions will be acknowledged via an automated system.

Final author manuscripts will be 8.5" x 11", not exceeding 6 pages; max 4 extra pages allowed at additional cost. The formatting instructions can be found on the Instructions page. Helpful information for paper formatting can be found on the here. Latex templates are also available.

Slides-based contributions can use the corporate/university format and style.

Your paper should also comply with the additional editorial rules.

Once you receive the notification of contribution acceptance, you will be provided by the publisher an online author kit with all the steps an author needs to follow to submit the final version. The author kits URL will be included in the letter of acceptance.

We would recommend that you should not use too many extra pages, even if you can afford the extra fees. No more than 2 contributions per event are recommended, as each contribution must be separately registered and paid for. At least one author of each accepted paper must register to ensure that the paper will be included in the conference proceedings and in the digital library, or posted on the www.iaria.org (for slide-based contributions).

CONTRIBUTION TYPE

Regular Papers (up to 6-10 page article -6 pages covered the by regular registration; max 4 extra pages allowed at additional cost- ) (oral presentation)
These contributions could be academic or industrial research, survey, white, implementation-oriented, architecture-oriented, white papers, etc. They will be included in the proceedings, posted in the free-access ThinkMind digital library and sent for indexing. Please submit the contributions following the instructions for the regular submissions using the "Submit a Paper" button and selecting the appropriate contribution type. 12-14 presentation slides are suggested.

Short papers (work in progress) (up to 4 pages long) (oral presentation)
Work-in-progress contributions are welcome. These contributions represent partial achievements of longer-term projects. They could be academic or industrial research, survey, white, implementation-oriented, architecture-oriented, white papers, etc. Please submit the contributions following the instructions for the regular submissions using the "Submit a Paper" button and selecting the contribution type as work in progress. Contributors must follow the conference deadlines, describing early research and novel skeleton ideas in the areas of the conference topics. The work will be published in the conference proceedings, posted in the free-access ThinkMind digital library and sent for indexing. For more details, see the Work in Progress explanation page. 12-14 presentation slides are suggested.

Ideas contributions (2 pages long) (oral presentation)
This category is dedicated to new ideas in their very early stage. Idea contributions are expression of yet to be developed approaches, with pros/cons, not yet consolidated. Ideas contributions are intended for a debate and audience feedback. Please submit the contributions following the instructions for the regular submissions using the "Submit a Paper" button and selecting the contribution type as Idea. Contributors must follow the conference deadlines, describing early research and novel skeleton ideas in the areas of the conference topics. The work will be published in the conference proceedings, posted in the free-access ThinkMind digital library and sent for indexing. For more details, see the Ideas explanation page. 12-14 presentation slides are suggested.

Extended abstracts (2 pages long) (oral presentation)
Extended abstracts summarize a long potential publication with noticeable results. It is intended for sharing yet to be written, or further on intended for a journal publication. Please submit the contributions following the instructions for the regular submissions using the "Submit a Paper" button and selecting the contribution type as Extended abstract. Contributors must follow the conference deadlines, describing early research and novel skeleton ideas in the areas of the conference topics. The work will be published in the conference proceedings, posted in the free-access ThinkMind digital library and sent for indexing. 12-14 presentation slides are suggested.

Posters (paper-based, two pages long) (oral presentation)
Posters are intended for ongoing research projects, concrete realizations, or industrial applications/projects presentations. The poster may be presented during sessions reserved for posters, or mixed with presentation of articles of similar topic. A two-page paper summarizes a presentation intended to be a POSTER. This allows an author to summarize a series of results and expose them via a big number of figures, graphics and tables. Please submit the contributions following the instructions for the regular submissions using the "Submit a Paper" button and selecting the contribution type as Poster Two Pages. Contributors must follow the conference deadlines, describing early research and novel skeleton ideas in the areas of the conference topics. The work will be published in the conference proceedings, posted in the free-access ThinkMind digital library and sent for indexing. 8-10 presentation slides are suggested. Also a big Poster is suitable, used for live discussions with the attendees, in addition to the oral presentation.

Posters (slide-based, only) (oral presentation)
Posters are intended for ongoing research projects, concrete realizations, or industrial applications/projects presentations. The poster may be presented during sessions reserved for posters, or mixed with presentation of articles of similar topic. The slides must have comprehensive comments. This type of contribution only requires a 8-10 slide-deck. Please submit the contributions following the instructions for the regular submissions using the "Submit a Paper" button and selecting the contribution type as Poster (slide-only). The slide-deck will be posted, post-event, on www.iaria.org.
8-10 presentation slides are suggested. Also a big Poster is suitable, used for live discussions with the attendees, additionally to the oral presentation.

Presentations (slide-based, only) (oral presentation)
These contributions represent technical marketing/industrial/business/positioning presentations. This type of contribution only requires a 12-14 slide-deck. Please submit the contributions following the submission instructions by using the "Submit a Paper" button and selecting the contribution type as Presentation (slide-only). The slide-deck will be posted, post-event, on www.iaria.org.
12-14 presentation slides are suggested.

Demos (two pages) [posted on www.iaria.org]
Demos represent special contributions where a tool, an implementation of an application, or a freshly implemented system is presented in its alfa/beta version. It might also be intended for thsoe new application to gather the attendee opinion. A two-page summary for a demo is intended to be. It would be scheduled in special time spots, to ensure a maximum attendance from the participants. Please submit the contributions following the submission instructions by using the "Submit a Paper" button and selecting the contribution type as Demos. The Demos paper will be posted, post-event, on www.iaria.org.

Doctoral forum submissions: (up to 6-10 page article -6 pages covered the by regular registration; max 4 extra pages allowed at additional cost- ) (oral presentation)
There contributions refer to PhD dissertations, new PhD approaches, and PhD out-of-the-book thinking, etc. They will be included in the proceedings, posted in the free-access ThinkMind digital library and sent for indexing. Please submit the contributions following the instructions for the regular submissions using the "Submit a Paper" button and selecting the appropriate contribution type Doctoral forum. 12-14 presentation slides are suggested.

Tutorial proposals
Tutorials provide overviews of current high interest topics. Proposals should be for 2-3 hour long. Proposals must contain the title, the summary of the content, and the biography of the presenter(s). The tutorials' slide decks will be posted on the IARIA site.
Please send your proposals to tutorial proposal

Panel proposals
The organizers encourage scientists and industry leaders to organize dedicated panels dealing with controversial and challenging topics and paradigms. Panel moderators are asked to identify their guests and manage that their appropriate talk supports timely reach our deadlines. Moderators must specifically submit an official proposal, indicating their background, panelist names, their affiliation, the topic of the panel, as well as short biographies. The panel's slide deck will be posted on the IARIA site.
Please send your proposals to panel proposal

Workshop proposals
See http://www.iaria.org/workshop.html

Mini Symposium proposal
See http://www.iaria.org/symposium.html

 
 

Copyright (c) 2006-2014, IARIA